Ellisys SANBlaze SBExpress-RM5 Скачать руководство пользователя страница 1

SANBlaze host server (1) (not included if you are using your own host server)
Two host cards required for the system:

x16 PCIe host interface module (1) 
4-port USB interface (1) 

PCIe cable(s) (4)      
Power cord (2)
USB cable (1)
SBExpress-RM5 NVMe SSD Test System (1)

Open the shipping container(s) and unpack all contents. Make sure you
have the following:

        

        These cards are shipped with the system or as add-on cards to be installed 
         in the field  

Quick Start RM5

Step 1: Unpack All Contents 

SBExpress-RM5 Dual Port NVMe SSD Test System

Step 2: Install the adapter(s) in the host system 

If you are using a SANBlaze host system, the adapters will already be installed for you and you can skip to Step 3. To install the adapter(s) in your own host
system, see the figures below for a sample installation of a SANBlaze host system for Gen5 to guide you for your own installation.

SANBlaze NVMe Gen5 Host System

Step 3: Connect PCI Cables Between the Host System and

the SBExpress-RM5

Connect the PCIe cable(s) from the host system (Step  2 above) to the SBExpress-RM5 NVMe Test System (shown below). Please note the
port numbering labeled on each system. 

COPYRIGHT © 2022 SANBLAZE TECHNOLOGY, INC. 

[email protected] | [email protected] | www.sanblaze.com

All information in this document is subject to change. Configurations rely on host system BIOS support and may be restricted by the host. Contact SANBlaze for additional information.

Gen5

p/n 400-0000026 Rev. 00

<< Host system w/o cables

<< Host system populated with cables

SBExpress-RM5 NVMe SSD Test System populated with

cables

Gen5 Host System populated with cables

PCIe cables on host system

PCIe cables on RM5 test system

Step 4: Install Drives in Front

All drives are installed through the front panel. Up to sixteen single or dual port drives can be installed in the SBExpress-RM5 NVMe SSD Test System.
See the LEDs section in the SBExpress-RM5 NVMe SSD Test System User's Guide for the behavior of the NVMe drives and SBExpress-RM5 test
system. Note: All drives must be installed before the system is powered on so that they are discovered properly.

Отзывы: