Elkron MP500/16, Руководство по программированию, Страница: 72 / 140

72 MP500/4N-8-16 Programming
4.20.4
Vocal call test
Proceed as follows to test that the vocal calls work perfectly:
1) Enter < Master / Installer code > , press and then .
2) Press repeatedly until TEST appears.
3) Press and press repeatedly until ADVANCED TESTS appears.
4) Press .
5) Press .
6) Press and to select the programmed vocal telephone number to be called. Press to
confirm.
7) The dialler will call the selected telephone number on the programmed channel and will repeat the
basic message three times.
8) Repeat from step 6 for the other telephone numbers to be tested.
9) Press repeatedly to exit from the menu.
4.20.5
Alarm receiving centre call test
Proceed as follows to test that the numeric protocol calls work perfectly:
1) Enter < Master / Installer code > , press and then .
2) Press repeatedly until TEST appears.
3) Press and press repeatedly until ADVANCED TESTS appears.
4) Press and press repeatedly until PROTOCOL CALL appears.
5) Press .
6) Press and to select the programmed telephone number for numeric code or modem calls
to be called. Press to confirm.
7) The dialler will call the alarm receiving centre and send the parameter corresponding to the test call
for correctly identifying the event.
8) Repeat from step 6 for the other telephone numbers to be tested.
9) Press repeatedly to exit from the menu.
UT01:MASTER
SYSTEM STATUS
UT01:MASTER
TEST
TEST
ADVANCED TESTS
ADVANCED
VOCAL CALL
VOCAL CALL
T01:xxxxxxxx
UT01:MASTER
SYSTEM STATUS
UT01:MASTER
TEST
TEST
ADVANCED TESTS
ADVANCED
PROTOCOL CALL
PROTOCOL CALL
T01:xxxxxxxx