MP500/4N-8-16 Programming
51
8) Press
.
9) Press
. Press
and
to select the required time. Press
to confirm.
10) Press
.
11) Press
. Press
and
to select the required time. Press
to confirm.
12) Press
repeatedly to exit from the menu.
4.18 TELEPHONE DIALER
IMPORTANT!
The MP500/4N, MP500/8 or MP500/16 control panel must be connected to at least one telephone network
PSTN or GSM. See the
Installation Manual
for more information on telephone connections.
IMPORTANT!
The control panel connection type determines EN50131 compliance.
A MP500/8 or MP500/16 control panel connected via the ILT500-N interface to an ATS4 external communicator, connected in
turn to a modem/router with ADSL line, is EN50131 grade 3 compliant.
A MP500/4N, MP500/8 or MP500/16 control panel connected directly to a PSTN line via the ILT500-N interface which uses
numeric protocols for alarm communications is EN50131 grade 2 compliant.
All other telephone connections, including use of the GSM network via the IMG500/N interface, are not EN50131 compliant.
4.18.1
Telephone numbers
The dialler of the MP500/4N, MP500/8 and MP500/16 panels may store up to 12,12,12 telephone numbers, respectively. Each number
may contain up to 28 digits or pauses in any combination.
Each pause lasts for 2 seconds. Simply queue pauses to obtain a longer pause. The pauses are inserted by pressing the
key and
are indicated on the display by a “
P
”.
The stored telephone numbers may be associated to the entire system (the telephone number will be used for any event) or to specif ic
partitions (the telephone number will be used only for the events concerning these partitions).
It is possible to select which telephone network (channel) the transmitter will use to connect with the outside: the traditional telephone
landline (PSTN) or the mobile phone network (GSM). The choice will only be possible if both networks are available (PSTN line
connected, GSM module inserted).
IMPORTANT!
The GSM network cannot be used in an EN50131 compliant system.
ADVICE:
By enabling the GSM answering machine the GSM module will always be active and calls will be sent faster.
4.18.1.1
Storing, editing and deleting a telephone number
The respective procedure are described in the
User Manual
.
PARAMETERS
ALARM COUNT
ALARM COUNT
10
PARAMETERS
T LACK OF POWER
T LACK OF POWER
1h
Содержание MP500/16
Страница 139: ...MP500 4N 8 16 Programming 139 ...