Elkron MP500/16 страница 110 Скачать руководство пользователя

Страница: 110 / 140

110

MP500/4N-8-16 Programming

7.3.16

Valid code entered by user on keypad event

This is generated
when...



A valid access code is entered.

It is stored...



In the Event Log and the Diagnose Log.

7.3.17

Edit date-time on keypad event

This is generated
when...



The date and time is edited.

It is stored...



In the Event Log and the Diagnose Log.

7.3.18

User code enable/disable event

This is generated
when...



An access code is enabled or disabled.

It is stored...



In the Event Log and the Diagnose Log.

7.3.19

Key enable/disable event

This is generated
when...



An electronic or proximity key is enabled or disabled.

It is stored...



In the Event Log and the Diagnose Log.

7.3.20

Key acquisition/deletion event

This is generated
when...



An electronic or proximity key is acquired or deleted.

It is stored...



In the Event Log and the Diagnose Log.

7.3.21

Timed programmer warning event

This is generated
when...



The timed programmer will arm the partitions soon.

It activates...



The programmed PO warning outputs (only if the control concerns the partition status).



The enabled and associated keypads (buzzer).

It is indicated...



On Timed programmer LED (only if the command concerns partition status).

7.3.22

Arming block event

This is generated
when...



Arming is blocked, e.g. because inputs are open.

It is stored...



In the Event Log and the Diagnose Log.

7.3.23

Arming not executed event

This is generated
when...



If one or more partitions are not armed because of severe system anomalies.

It activates...



The dialler to send the incomplete partition arming message in form of numeric code (if programmed).

It is stored...



In the Event Log and the Diagnose Log.

7.4

DESCRIPTION OF ACOUSTIC INDICATIONS

If appropriately programmed, the keypads can emit auditory indications following given events.

7.4.1

Entry/exit time indication

This is generated
when...



One or more partitions associated to the keypads on which this function is enabled are armed (exit time).



One or more areas with one or more associated partitions with this function enabled are armed (exit time).



An input is opened (e.g. a customised first entry input) (entry time).

It lasts...



For the partition entry/exit time or the delayed input delay time.

It is activated on...



Enabled and associated keypads.



The programmed buzzer outputs which have at least one partition in common with the arming input.

IMPORTANT!

The entry/exit acoustic indication function is activated and configured to comply with EN50131 by default on

control panels. Changing this mandatory configuration will cancel EN50131 compliance of the system.

Содержание MP500/16













































































































































Результаты поиска

Содержание MP500/16

Отзывы:

Похожие инструкции для MP500/16

Бренды по названию

Популярные бренды

Elkron MP500/16, Руководство по программированию

Результаты поиска

Содержание MP500/16

Отзывы:

Похожие инструкции для MP500/16

Бренды по названию

Популярные бренды