Elkron MP500/16 страница 104 Скачать руководство пользователя

Страница: 104 / 140

104

MP500/4N-8-16 Programming

7.2.10

Detector jamming alarm

Monitoring of devices provided with fault output can be implemented in combination on control panels.

This is generated
when...



If one or more customised jamming inputs are open.

It activates...



The programmed detector fault outputs which have at least one partition in common with the input which

generated the event (with partition armed).



The dialler to send the respective alarm message (if programmed) in form of numeric code, vocal call or

modem communication.

It is stored...



In the Diagnose Log and in the fault and anomaly memory.

It is indicated...



On fault LED of keypads which have at least one partition in common with the input which generated the

event.



On readers which have at least one partition in common with the input which generated the event.

After having solved the
problem, the control
panel...



Stores end of fault in the Diagnose Log.



Deactivates the programmed fault detector outputs.

7.2.11

Detector fault alarm

Monitoring of devices provided with fault output can be implemented in combination on control panels.

This is generated
when...



If one or more customised detector fault inputs are open.

It activates...



The programmed detector fault outputs which have at least one partition in common with the input which

generated the event (with partition armed).



The dialler to send the respective alarm message (if programmed) in form of numeric code, vocal call or

modem communication.

It is stored...



In the Diagnose Log and in the fault and anomaly memory.

It is indicated...



On fault LED of keypads which have at least one partition in common with the input which generated the

event.



On readers which have at least one partition in common with the input which generated the event.

After having solved the
problem, the control
panel...



Stores end of fault in the Diagnose Log.



Deactivates the programmed fault detector outputs.

7.2.12

Faulty siren alarm

Monitoring of devices provided with fault output can be implemented in combination on control panels.

This is generated
when...



One or more customised siren fault inputs are open.

It activates...



The programmed system fault outputs which have at least one partition in common with the input which

generated the event.



The dialler to send the respective alarm message (if programmed) in form of numeric code, vocal call or

modem communication.

It is stored...



In the Diagnose Log and in the fault and anomaly memory.

It is indicated...



On fault LED of keypads which have at least one partition in common with the input which generated the

event.



On readers which have at least one partition in common with the input which generated the event.

After having solved the
problem, the control
panel...



Stores end of fault in the Diagnose Log.



Deactivates the programmed failure outputs.

Содержание MP500/16













































































































































Результаты поиска

Содержание MP500/16

Отзывы:

Похожие инструкции для MP500/16

Бренды по названию

Популярные бренды

Elkron MP500/16, Руководство по программированию

Результаты поиска

Содержание MP500/16

Отзывы:

Похожие инструкции для MP500/16

Бренды по названию

Популярные бренды