24
MEDEA Programming Manual
4.1.2
Date and Time
It is accessed through the
CONFIGURATION
→ Central Unit → Global Parameters
menu.
Figure 7 - Date and time entry
The following items are displayed and can be configured:
•
Current Date and Time
.
Time automatic Update
must be disabled to enter the date and time.
manually. The date can be entered manually or selected from the calendar that opens by clicking
The time is set by acquiring it from the connected device by clicking the
Set Time by PC
button.
•
Keypad Time Mode
: This can be used to select the format of the displayed time. The options are:
o
Automatic
: The time display format is determined by the
c
set in the
Parameter
menu.
o
Anglosaxone
: The time is displayed in 12-hour format, e.g. 3:30 PM.
o
European
: The time is displayed in 24-hour format, e.g. 15:30.
•
Time Automatic Update
: The clock is synchronised using an NTP (Network Time Protocol) server.
The server address is predefined and the control panel must be connected to the Internet. The time
display format is determined by the Geographic
Zone
set in the
Parameters
menu. In this mode, the
switch from winter time to summer time and vice versa takes place automatically.
•
Set Time by PC:
By deactivating the function
Time Automatic Update
and after having clicked on
the set Time by PC button, it is possible to assign to the control panel the current time set on the
device with which you are connected to the control panel.
4.1.3
Control Unit Upgrade from cloud
It is accessed through the
CONFIGURATION
→ Central Unit → Global Parameters
menu.
Figure 8 - Software update from cloud
