135
Configuring a new scenario
Short cuts can be created only by the Master user.
To create a new short cut:
1. Click on the icon
at the top right of the HOME AUTOMATION section in SHORT
CUTS page. The NEW SCENARIO page will appear. The icon
is visible only if it is
still possible to insert a scenario.
2.
It is nece
ssary to insert a descriptive name for the new short cut in the “Label” field.
The maximum length is 24 characters.
SAVE
button is disabled until at least a
character is entered in Label field.
The name inserted must be different from the short cut names already present. Any
error will be signalled by the message “Short cut label already present. Insert a
different name”.
3.
Select by clicking on the selection square, the output to be activated or stimulated
executing the scenario. For on-
off output, it’s possible to define if they’ve to be
activated or disactivated during scenarion execution.
4. Press the
SAVE
button to create the new scenario. If at least one output is not
selected, the error message “Select at least one” will appear. Clicking on
X
icon, is
possible to close the page discarding selections done.
5. The new scenario created is disabled by default and must be enabled in order to use it.
