131
Configuring a new short cut
Short cuts can be created only by the Master user.
To create a new short cut:
1. Click on the icon
at the top right of the BURGLAR ALARM section in SHORT
CUTS page. The NEW SHORT CUT page will appear. The icon
is visible only if
it is still possible to insert a short cut.
2.
It is necessary to insert a descriptive name for the new short cut in the “Label” field.
The maximum length is 24 characters.
The name inserted must be different from the short cut names already present. Any
error will be signalled by the message “Short cut label already present. Insert a
different name”.
3. Select by clicking on the selection square, the areas and partitions that are part of
the new short cut. Areas and partitions can be selected in the combination desired.
If an area is selected, all its partitions are automatically selected; if all the partitions
of an area are selected, the area itself is automatically selected.
4. Press the
SAVE
button to create the new short cut. If at least one partition or one
area is not selected, the error message “Select at least one partition to arm” will
appear. Clicking on
X
icon, is possible to close the page discarding selections done.
5. The new short cut created is disabled by default and must be enabled in order to
use it.
