Installation/Configuration ER600
39
12 - TABLES
12.1 IDP MESSAGE STRUCTURE
One message is sent for each single event. Several events will be sent in the same telephone call, if applicable.
For example, messages related to each partition concerned by an arming or disarming event will be sent in sequence in the same
telephone call because the global system arming or disarming does not exist as an event.
The message string structure is applicable for all events.
A
A
A
A
1
8
Q
E
E
E
G
G
C
C
C
S
Rem.Ctrl Code
FIXED
Qualification
Event
Group
Code or input ID
Cks
Where:
Block
Code
Description
Event
145
radio device tamper alarm, such as HP and KP
344
jamming alarm (in presence of radio expansion module only)
355
no supervision alarm (in presence of radio expansion module with devices only)
383
radio device tamper alarm, such as DC and IR
384
radio device low battery alarm
401
arming/disarming from user code, key, remote control
Code or input ID
The meaning of the code depends on the event.
Event
Code
Description
to identify a radio KP user
0
<user num>
event generated by a command sent by the radio keypad of a radio
expansion
to identify commands from keypad
200
event generated by a command sent by a remote control of a radio
expansion
To identify the device which generated
the tamper alarm
501
Event generated by tamper of the radio expansion module 1
To identify the device which generated
the tamper alarm
502
Event generated by tamper of the radio expansion module 2
To identify the device which generated
the failure alarm consequent to loss of
communication
501
Event generated by no communication of a radio expansion module 1
To identify the device which generated
the failure alarm consequent to loss of
communication
502
Event generated by no communication of a radio expansion module 2
To identify the device which generated
the low battery alarm
501
Event generated by the battery of a radio device of the radio
expansion module 1.
To identify the device which generated
the low battery alarm
502
Event generated by the battery of a radio device of the radio
expansion module 2
Table 2 - ID code or input with IDP protocol
