Installation Instructions:
Crosstown Farmhouse Sinks
1333 Butterfield Road, Suite 200 | Downers Grove, IL 60515 | elkay.com
©2019 Elkay Manufacturing Company (8/19) 1000005325
• Elkay recommends that undermount sinks be installed by a professional, experienced installer.
• Due to the custom nature of this type of installation, no cutout template is included. Elkay recommends providing
the cabinet maker with the actual sink to be installed prior to the cabinet fabrication. It is recommended that the
sink be installed per one of the below installation profiles shown below. It is further recommended that the
installer(s) discuss this with the customer and agree that this finished appearance is the desired effect. Elkay is
not responsible for improper sink or countertop installations.
• Proper installation requires a coordinated effort including advanced dialog between the designer (or customer),
the cabinet maker, the countertop fabricator, and the sink installer during the design and installation phase.
• Elkay undermount sinks should only be fastened to a solid surface countertop (i.e. granite / Corian
®
). Elkay
recommends that the sink cutout and mounting holes be cut by the countertop fabricator prior to installation.
•
Elkay is not responsible for the sink or countertop if damaged during installation.
• Metal edges may be sharp. Use caution when handling.
• Follow all local plumbing and building codes.
• Inspect sink for damage prior to beginning installation.
Attention Installer:
Installation Profiles
Sink
Countertop
1/8" No Reveal Installation
Countertop
overhang
approx. 1/8
"
Mounting
bracket
(Optional
accessory)
Fastener
(Not furnished)
Silicone caulk
(Not furnished)
OPENING IN
COUNTERTOP
COUNTERTOP
1/2" RADIUS FOR 1/8”
OVERHANG
SINK PROFILE
(ECTRUF32179R SHOWN)
CABINET
BASE
COUNTERTOP
OVERHANG 1/8"
29-3/4” FOR 1/8”
OVERHANG
17-7/8”
FROM
CABINET
FRONT
FOR 1/8”
OVERHANG
COUNTERTOP
MINIMAL
GAP
MINIMAL
GAP
MOUNTING WOOD
STRIP ON SIDES
AND BOTTOM OF
FRONT PANEL
FRONT PANEL TO
MOUNT FLUSH TO CABINET
FRONT OF
CABINET
FASTENERS (NOT FURNISHED)
THROUGH CABINET TO SECURE
TO WOOD STRIP IN FRONT PANEL
OF SINK. RECOMMENDED (3) ACROSS
FRONT AND (1) ON EACH SIDE.
MOUNTING
CLIP
FASTENER
(NOT FURNISHED)
SINK
PROFILE
CABINET
17-7/8” FROM CABINET FRONT
FOR 1/8” OVERHANG
NOTE : IN 36
" CABINET
THIS SINK WILL NOT
REQUIRE CLIPS ON SIDES
OR FRONT, ONLY BACK.
