manualshive.com logo in svg

EliteConnect SMC2555W-AG, Руководство пользователя

Поделиться
Скачать
EliteConnect SMC2555W-AG Скачать руководство пользователя страница 175

Interface Commands

6-89

wpa-mode 

This command specifies whether Wi-Fi Protected Access (WPA) 
is to use 802.1x dynamic keys or a pre-shared key.

Syntax

wpa-mode <dynamic | pre-shared-key>

• dynamic - WPA with 802.1x dynamic keys.
• pre-shared-key - WPA with a pre-shared key.

Default Setting 

dynamic

Command Mode 

Interface Configuration (Wireless)

Command Usage 

• When the WPA mode is set to “dynamic,” clients are 

authenticated using 802.1x via a RADIUS server. Each 
client has to be WPA-enabled or support 802.1x client 
software. A RADIUS server must also be configured and be 
available in the wired network.

• In the dynamic mode, keys are generated for each wireless 

client associating with the access point. These keys are 
regenerated periodically, and also each time the wireless 
client is re-authenticated.

• When the WPA mode is set to “pre-shared-key,” the key 

must first be generated and distributed to all wireless clients 
before they can successfully associate with the access point.

Example 

Related Commands

wpa-clients (page 6-87)
wpa-preshared-key (page 6-90)

SMC-AP(if-wireless g)#wpa-mode pre-shared-key

SMC-AP(if-wireless g)#

Содержание SMC2555W-AG























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды