EliteConnect SMC2555W-AG страница 166 Скачать руководство пользователя

Страница: 166 / 214

Command Line Interface

6-80

RTS frame, the station sends a CTS frame to notify the
sending station that it can start sending data.

• Access points contending for the wireless medium may not

be aware of each other. The RTS/CTS mechanism can
solve this “Hidden Node” problem.

Example

authentication

This command defines the 802.11 authentication type allowed by
the access point.

Syntax

authentication <open | shared>

• open - Accepts the client without verifying its identity using

a shared key.

• shared - Authentication is based on a shared key that has

been distributed to all stations.

Default Setting

open

Command Mode

Interface Configuration (Wireless)

Command Usage

• Shared key authentication can only be used when WEP is

enabled with the encryption command, and at least one
static WEP key has been defined with the key command.

• When using WPA or 802.1x for authentication and dynamic

keying, the access point must be set to open.

SMC-AP(if-wireless g)#rts-threshold 256

SMC-AP(if-wireless g)#

Содержание SMC2555W-AG























































































































































































































Результаты поиска

Содержание SMC2555W-AG

Отзывы:

Похожие инструкции для SMC2555W-AG

Бренды по названию

Популярные бренды

EliteConnect SMC2555W-AG, Руководство пользователя

Результаты поиска

Содержание SMC2555W-AG

Отзывы:

Похожие инструкции для SMC2555W-AG

Бренды по названию

Популярные бренды