Elitech FreezePoint 6000 Series, Руководство пользователя

Страница: 29 / 138

29
Section 2: Design and Function
Interface configuration
COM1 data port
The upper COM1 (RS232) serial data port is used to connect a barcode reader. The barcode reader is
configured at the factory and can be purchased from ELITechGroup.
WARNING!
Incompatible barcode reader!
The use of a barcode reader other than the barcode reader supplied by ELITechGroup is not
recommended because potential incompatibilities cannot be ruled out.
Barcode IDs can be composed from the following subset of printable ASCII characters (incl. “space”) as
defined in the ANSI X3.4-1986 standard:
!#$%’()*+-./0123456789;=?@ABCDEFGHIJKLMNOPQRSTUVWXYZ
[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
COM2 or USB data port
WARNING!
To protect life and equipment:
Devices and accessories connected to the RS232 or USB connectors must meet the applicable
safety standards for medical lab equipment.
The device can output the recorded measurement results via the COM2 (RS232)
serial data port in the middle or the USB port.
To select the data port, select
Settings Lab Options Log Port . The
following screen lets you select between COM2 and USB.
Figure 12 Set log port
Transmit Perameters
The “Send Test String” option lets you
test the communication.
USB port driver
A software driver is required to use the USB port. There are two methods for installing the driver:
• Automatic: Connect the device to the PC using the USB cable and switch on the device. The
operating system of the PC detects the interface, automatically installs the required software driver and
notifies the user that installation was successful. The USB port can now be used as an additional COM
interface.
• Manual: The PC does not automatically detect the device or the operating system is missing the
required software driver. In this case, please contact the service team at ELITechGroup for the driver.
Parameter Valve
Rate 9600 baud
Data bits 8
Parity None
Stop bit 1
Coding ASCII