background image

Rev. 04/25/17 DR 

 

elitescreens.com 

 

 

 
 

 
 
 

 

 

WhiteBoardScreen™ Series 

 

Dry-Erase Ambient Light Rejecting Projection Screen 

 

User’s Guide

 

 

 

Thank you for choosing the WhiteBoardScreen™ Series dry-erase whiteboard projection screen! Please 
read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a 
long product life. 
 
 

Precautionary Notes: 

 
Before using the dry-erase function of your whiteboard screen, please make note of the following 
instructions to properly maintain and clean your dry-erase surface projection screen. (These Whiteboard 
cleaning tips are just as relevant with any dry-erase writing surface as they are with our Whiteboard-
Projection Screens.) 
 
1.Only use a high density foam eraser when removing dry-erase markings from the Whiteboard screen. 

 

2. Do not use abrasive erasers as these may scratch the surface of the screen.  
 
3. Never spray the whiteboard cleaner solution onto the surface while marker writing is present and then 
attempt to use a high density foam eraser to remove. This will only smear the dry-erase marker ink 
making the surface more difficult to clean and will likely ruin the foam eraser. 
 
4. If there are any dry-erase markings left behind even after attempting to remove them using our high 
density erasers, spray our whiteboard cleaning solution directly onto the screen surface and use only a 
soft microfiber cloth to wipe-down and clean the area. 
 
For a video demonstration, please visit: 

http://www.elitescreens.com/whiteboardscreen-cleaning

 

 
If replacement cleaning accessories are needed, please visit the Whiteboard cleaning accessories section 
of our website at 

http://www.elitescreens.com/clean-whiteboard

 

 

 

 
 

 

 

 

 

 

Содержание WhiteBoardScreen Series










Отзывы: