background image

Rev.071916-MZ 

www.elitescreens.com

 

 

 

 

 

 

In-Ceiling Electric Motorized Front Projection Screen 

Evanesce Tab-Tension B Series 

User’s Guide 

 
 

Important Safety & Warning Precautions 

Make sure to read this user’s guide and follow the procedures below. 

 

Caution: 

The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra 

Black  Top  Drop  in  the  roller.  Please  be  aware  of  this  as  it  will  void  your  warranty  with  Elite  Screens. 
Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this 
unit are prohibited and will void your warranty.  
 
 

 

Please retain this user’s guide for future reference. 

 

To avoid damaging the unit, do not use with any unauthorized accessories not recommended by 

the manufacturer. 

 

Handle the unit carefully during transportation to avoid any damages. 

 

To ensure safe and reliable operation, direct connection to a properly grounded power source is 

advised. 

 

The power outlet supplying power to the unit should be close to the unit and easily accessible. 

 

Do not install the unit on uneven, inclined surfaces;  

 

Do not install in damp places to avoid an electric shock or short circuit. 

 

Do not place any heavy objects over the power cord. 

 

Position the power cord properly to avoid creating a trip obstacle. 

 

To avoid an electrical shock or fire, due to a loose contact or short circuit, do not overload the 

power cord. 

 

The internal & external parts of this unit are not end user serviceable. Do not attempt to 

disassemble this unit by yourself. No one except authorized technicians can open and make 
repairs to this unit. 

 

Make sure the power source that this unit is connected to has a continuous power flow. 

 

If there is need to use an extension cord, make sure the cord has an equal rating as the appliance 

to avoid over heat. 

 

Do not handle the power plug when your hands are wet or your feet are in contact with water. 

 

Properly dispose of this equipment according to the environmental regulations in your area 

when product is no longer of service. 

 

Содержание Evanesce T B ETB100HW2-E12










Отзывы: