V021417
www.elitescreens.com
1
DIY Wall 2 Series
Indoor/Outdoor Portable Roll-down Projection Screen
User’s Guide
The DIY Wall 2 Projection Screen was designed to provide a simple portable solution to hang
on an indoor/outside wall, patio, tree or just about any surface you want to project on. When
using outdoors, please keep away from direct sunlight or rain to ensure longevity. The screen
material can be cleaned with mild soap and water.
For more a video demonstration on how to assemble and install the DIY Wall 2, please visit
www.elitescreens.com/videos/diyw2
Hardware and Parts List
：
Please make sure all parts listed below are included before installation.
A. Top & Bottom support bar x 2pcs
B. Plastic end cap x 4pcs
C. Buttons x 37-53pcs
G. Screen Material
E. Material Strip x 4pcs
D. Hollow wall anchor x
4pcs
F. M5*60mm screws x 4pcs
Material Installation:
1.
Lay the
screen material
(G)
completely flat with the back facing down on a clean surface
in a horizontal position.
2.
Take out the
weight bars (A)
and
buttons (C)
from the packaging.
3.
Align the
material strip (E)
with the first two (2) holes of each corner, and attach them to
the
screen material
(G)
by inserting and fastening the button clips as shown in
Fig. 1
.
*Please be sure the button is inserted through the front side of the screen material and
secured with the clasp on the backside of the material.
