Hardware for unit assembly
SPECIAL NOTE
In all steps involving camlocks, please
note the correct position of the camlock
in the illustration at the left. Check all
camlocks before aligning and joining
pieces together.
IMPORTANT: Throughout assembly
of the unit, camlocks must be inserted with
the openings facing the nearest unfinished
edge and screwdriver slot parallel to
unfinished edge.
IMPORTANT NOTES & CAUTIONS/WARNINGS
• Carefully read and follow these instructions for assembly.
• Please handle parts carefully, some parts may be heavy.
• To protect the unit and your flooring surface we recommend working on a padded or carpeted area, you may also use the open box the unit
came in for this purpose.
• For proper construction & integrity/assembly and for TV weight support and safety, all connections need to be sufficiently tight. However, do
not over-tighten connections to the point of stripping screw threadings. Parts are designed to fit together tightly, however, avoid excessive
force but rather align & fit panels together methodically and with patience.
• For some heavy or large units, it may be recommended for 2 people to work together on this assembly.
• It is extremely important to attach the
BACK PANEL
as instructed within this manual. Such panels are crucial for the stability and structural
support of the unit.
• Please read additional
important safety information
at the end of this instruction manual.
• We urge you to keep this manual with your unit for future reference.
ALIGN CAMLOCK &
CONNECTING BOLT
JOIN PIECES
TOGETHER
TURN CAMLOCKS
180° CLOCKWISE
USING A FLATHEAD
SCREWDRIVER
CAMLOCK/CONNECTING BOLT PROCEDURE
1
2
3
G
16
5/8"
Wood Screws
for Back Panel
F
14
Camlocks
A
14
Connecting
Bolts
BLACK
J
14
Plastic
Camlock Covers
H
8
1" Long
Shelf Pins
K
8
Wooden Dowels
RR
1
Plastic
Hole Cover
PLEASE NOTE:
The following numbers
and letters correspond
to the sketches in this
instruction booklet.
CABINET PARTS:
1. Top Panel
2. Bottom Panel with
attached Base and
Swivel Mechanism.
3. Left and Right Side
Panels (identical)
4. Two Vertical
Mouldings (identical)
5. Two Adjustable
Shelves (identical)
6. Back Panel
(2 identical parts)
2
4
4
3
3
6
6
1
5
5
30 1/4"
22"
18"
475865
Page 1/4
04.10.07
PLEASE DO NOT RETURN UNIT TO STORE FOR PARTS & CUSTOMER SERVICE.
PLEASE CALL 1-800-ELITE-48. CUSTOMER SERVICE HOURS EASTERN TIME 8:45 AM - 4:45 PM M-F
VISIT OUR WEBSITE AT: www.elite-inds.com
Thank you for purchasing this Elite product. You will need the following tools:
Phillips Head Screw Driver • Straight Blade Screw Driver • Rubber Padded Hammer or Mallet
ASSEMBLY INSTRUCTIONS
EL149 S — SWIVEL BASE HI-BOY STAND
OVERALL DIMENSIONS: 30 1/4" H x 22" W x 18" D, 19 1/3" (Bottom)
