www.elinz.com.au / [email protected] 1300 881 773 www.elinz.com.au / [email protected] 1300 881 773
Step 2: Tick
If you have finished the above steps, click Next
, then click
Next
to enter
the
Network configuration
interface;
Step 3: Click
Go to Setting
to enter the network setting interface of the mobile
device, then connect to the
CLOUDCAM_XXXX
Wi-Fi;
Step 4: Select the Wi-Fi your mobile device is connected, enter the correct
password, then click
Next
.
The camera will connect to the Internet after 2 beeps from the camera. During
the process, you will hear
"
Please wait for Wi-Fi connecting
"
and
"
Please wait
for Internet connecting
"
. When you hear
"
Internet connected, welcome to use
cloud camera
"
, the camera is connected to Wi-Fi successfully.
Offline Direct AP Connection
Connect your mobile device to the Wi-Fi of the camera to watch the videos or
set up the camera when there is no network connection. However, your mobile
device must be located within the range of the camera's Wi-Fi signal.
Step 1: Logout from the App first.
Step 2: Press and hold the
Reset
button for 2s, the camera will be rebooted.
You will hear "Enter direct AP access mode after reboot". There will be no
more voice prompts after rebooting;
Step 3: Enter the login interface of the App and click
Local Login
or the
icon
to enter the
Tool
interface, then tap
AP networked device preview
to continue.
Step 4: Click
Next
. There will be a pop-up window and click
Confirm
to enter
the
Network setting
interface of the App. Click
Go to Setting
to enter the network
setting interface of the mobile device;