eLine ELC-576ET Скачать руководство пользователя страница 1

All trademarks in this manual are properties of their respective owners.

TABLE

1 BEFORE YOU BEGIN ................................................................................................................. 2

1.1 Features................................................................................................................................ 2
1.2 Package Includes .................................................................................................................. 3
1.3 Minimum System Requirements ............................................................................................. 3

2 HARDWARE INSTALLATION................................................................................................... 4

2.1 Connection Diagram ............................................................................................................. 4
2.2 LED Indicators ..................................................................................................................... 4

3 SOFTWARE INSTALLATION.................................................................................................... 5

3.1 Software Installation for Windows

®

 95 .................................................................................. 5

3.2 Software Installation for Windows

®

 98 .................................................................................. 7

3.3 Software Installation for Windows

®

 NT................................................................................ 13

3.4 Software Installation for Linux Red Hat 6.0 ......................................................................... 14

4. COMMAND REFERENCE ....................................................................................................... 15

4.1 AT Commands..................................................................................................................... 15
4.2  Dial Modifiers.................................................................................................................... 22
4.3  Commands Not Preceded By AT ......................................................................................... 23
4.4 S Register Reference ........................................................................................................... 23

5. MODEM REFERENCE............................................................................................................. 30

5.1 Troubleshooting .................................................................................................................. 30
5.2 Result Codes ....................................................................................................................... 30
5.3 Application Examples.......................................................................................................... 31

APPENDICES ................................................................................................................................ 34

Appendix A: Caller ID Commands (Optional) ........................................................................... 34
Appendix B: Technical Specifications........................................................................................ 35
Appendix C: Quick Reference.................................................................................................... 36
Appendix D: Glossary............................................................................................................... 38
Appendix E:  ASCII CODE TABLE ........................................................................................... 39
Appendix F: FCC/DOC REQUIREMENTS................................................................................ 40

Содержание ELC-576ET












































Отзывы: