Elgo LIMAX33 CP-00 SERIES, Руководство владельца и по безопасности, Страница: 88 / 92

Functional Safety
- 88 -
Re-Start after Fault Clearance
After the fault clearance:
1. Reset the emergency stop mechanism if necessary
2. Reset the error report at the super-ordinate system if necessary
3. Ensure that there are no persons in the danger area
4. Follow the instructions of chapters

10 and

11 as far as necessary
WARNING!
Danger of injury through non-conventional fault clearance!
Non-conventional fault clearance can lead to severe injuries and damage of property.
Therefore:

Any work to clear the faults may only be performed by sufficiently qualified staff

Arrange enough space before starting the works

Make sure that the mounting area is clean and tidy. Loose components and tools are
sources of accidents.
If components need to be replaced:

Pay attention to a correct installation of the spare parts.

Reinstall all the fixing elements properly

Before turning on the device, ensure that all covers and safety equipment is installed
correctly and works properly
18 Repairs / Maintenance

The LIMAX33 CP-00 device is maintenance free.

The magnetic tape is maintenance free.

Repairs by the user are not allowed.

If necessary, repairs are carried out by the manufacturer.

In case of irreparable damages or the end of maximum product life; the LIMAX33 CP-00 and
magnetic tape must be disposed in accordance to the statutory applicable regulations.