Type Designation
- 34 -
14
Type Designation
14.1
Accessories
Table 7: Accessories for LIMAX1M
Order designation
Description
LIMAX1M MW SET
Mounting angle to attach LIMAX1M to the lift cabin
AB20-80-10-1-R-D-15-BK80 Magnetic tape LIMAX1M, absolute encoded single track system
LIMAX MKF
Installation kit for suspended installation with dowel
LIMAX MKB
Installation kit for suspended installation with guiding rails and rail holder
LIMAX RMS
Installation kit for suspended installation with crossbeam for standard layout
LIMAX RMS 90
Installation kit for suspended installation with crossbeam for Rucksack-layout
LIMAX S-RMS
Installation kit for suspended installation, with tape detection
LIMAX S-RMS2
Installation kit for suspended installation, with tape detection 2
LIMAX1M
CON
00
Device Designation:
Signal Cable Length:
Version:
Resolution:
LIMAX1M = LIMAX1 MINI (single-channel)
CON
= connector on housing (without cable)
62N5
= 62.5 µm = 0.0625 mm
0125
= 125 µm = 0.125 mm
0250
= 250 µm = 0.25 mm
0500
= 500 µm = 0.50 mm
1000
= 1000 µm = 1.00 mm
-
-
-
00
= standard version
01
= first special version (etc.)
-
1000
CO1T
RJ45
-
Example:
CO1T* = CANopen [lift profile DS417]
standard
CO0T* = CANopen [encoder profile DS406]
option
USB0
= USB [standard protocol]
option
4220
= RS422 [standard protocol RS422 / Position]
on request
4850
= RS485 [standard protocol RS485]
on request
SSB0
= SSI [25 Bit binary code / Position]
on request
SSG0
= SSI [25 Bit Gray code / Position]
on request
*) Note: The CAN interface is in general terminated by 120 R, but not galvanically isolated
Interface:
Connection Options:
RJ45
= RJ45 slot
USBM
= Mini USB slot