ELGO Electronic MTM-A-000 Series, Руководство по эксплуатации

Страница: 9 / 25

Technical Data
- 9 -
6 Technical Data
6.1 Identification
The type label serves for the identification of the unit. It is located on the housing of the measuring system and
gives the exact type designation (

11) with the corresponding part number. Furthermore, the type label con-
tains a unique, traceable device number. When corresponding with ELGO please always indicate this data.
6.2 Dimensions of the MTM-A Standard Housing
Figure 2: Dimensions of the MTM-A standard sensor housing
*) cable length
**) average sensor pitch line = center of the round rod