53
10. 3. TAKING CARE OF SEAL
- Oven seal is an essential attribute that provides oven performance. Over time, the
seal may become dirty. In this case it may be cleaned with a moist cloth. It is not
allowed to clean the seal with abrasive agents. If the seal wears out or ruptures,
contact an authorized service center.
- Some models have a catalytic wall installed. It is covered with special enamel,
which collects some fat that forms inside the oven during cooking. Do not clean the
catalytic wall. The sponge surface is self-cleaning under the influence of steam and
carbon dioxide.
11. REPLACING THE LIGHT BULB IN THE OVEN
ATTENTION!
DISCONNECT THE OVEN FROM THE POWER
SOURCE PRIOR TO REPLACING THE LIGHT BULB.
11.1. The oven light bulb shall match the following parameters:
-
High thermal resistance – up to 300 ºС
-
Electrical parameters: 220-240 V AC 50 Hz
-
Power 15 W
11.2. Replacing the light bulb:
-
Remove
the protective glass cover
(А) by
turning it counterclockwise.
-
Remove the light bulb by turning it
counterclockwise or pulling it towards yourself
depending on the type of lamp.
-
Placing the light bulb is carried out in reverse order.
12. POSSIBLE MALFUNCTIONS AND TROUBLESHOOTING.
ATTENTION!
IN ANY CASE DO NOT TRY TO REPAIR THE OVEN BY
YOURSELF.
REPAIRS SHALL BE CARRIED OUT ONLY IN AN
AUTHORIZED SERVICE CENTER.
Before contacting a service center, check for possibility of easy troubleshooting the
problem by using the list below.
