23
HMD8 DSP/
USER’S MANUAL
6.4.5
OUTPUT CHANNEL GROUPS
Each output channel can be associated with one or more groups. If the output channel is associated with one or
more groups, its volume will also be adjusted according to the volumes of the associated groups.
The association with the groups can be performed in the output channel
settings panel.
By selecting a group, you can adjust the volume in the relative panel showed in the image below:
The next image shows the settings panel for the groups where you can rename them:
By moving the mouse over the button to select the group, a tooltip containing the name of the channels belonging to
that group is displayed. The following image shows an example:
Remark:
the most common use is to associate one or more outputs to a group to adjust the volume of the subwoofer.
3
2
1
4
Group level:
adjust the group level.
Selection button:
select the group.
Groups settings panel:
open the groups settings panel.
Help:
to open the user guide.
1
2
3
4
6
