RolTop Roller Blind Drive
138133301_EN_1116
RolTop Roller Blind Drive
13 Operating and installation instructions
Please keep these operating instructions for later use, to be
available throughout the life of the product!
The German manual is the original version.
All other documents represent the language translations of
the original text.
All rights in the case of a patent, utility model or ornamental
design registration are reserved.
14 General for instructions
The content structure is based on the life cycles of the elec-
tric motor drive (hereinafter referred to as "Product").
The manufacturer reserves the right to make changes to
the Specifications stated in these Operating Instructions
at any time. These may, in individual cases, be different
from the respective product version, however the functional
information will not undergo significant changes or become
invalid. The current version of the Specifications may be
requested from the manufacturer at any time. No claims
may be asserted against the manufacturer as a result of the
preceding sentence. Deviations from text or picture state-
ments are possible and depend on the technical develop-
ment, features, and accessories of the products. Deviating
information on special versions will be explained by the
manufacturer in the sales documentation. Other information
shall remain unaffected by these provisions.
14.1 Standards and Directives
During the design process, the basic health and safety
requirements of the applicable laws, Standards and Direc-
tives were complied with. The safety is confirmed by the
declaration of conformity (see "Declaration of Conformity").
All safety information in these Operating Instructions refer
to the laws and regulations currently applicable in Germany.
All instructions in the Operating Instructions shall be ob-
served without limitation and at any time. Beside the safety
instructions contained in these Operating Instructions, the
provisions for accident prevention, environmental protection
and occupational safety, which are applicable for the oper-
ating site, must be observed. Provisions and Standards for
the safety rating can be found in the Declaration of Con-
formity
Table Of Contents
13
Operating and installation instructions
1
14
General for instructions
1
14.1 Standards and Directives
1
14.2 Intended use
1
14.3 Foreseeable misuse
2
14.4 Warranty and liability
2
14.5 Customer service of the manufacturer
2
15
Safety
2
15.1 General safety instructions
2
15.2 Layout of the safety guidelines
2
16
Product description
3
17
Assembly
3
17.1 Mechanical fastening
3
17.2 Electrical connection
4
17.3 Connection example, RolTop 230 V/50 Hz
4
17.4 Parallel connection
4
17.5 Commissioning
4
17.6 Setting the end positions and the relief
4
17.6.1 Relief function for the end position(s)
5
17.6.2 Relief function at the upper stop
5
17.6.3 Relief function at the lower stop
5
17.6.4 Changing / Deleting the limit positions
and deleting the discharge function
5
17.6.5 Four variants of end position settings
5
17.6.6 Variant A: Upper and lower end position freely adjust-
able
5
17.6.7 Variant B: Fixed upper limit stop / lower
end position freely adjustable 6
17.6.8 Variant C: Fixed upper and lower limit stop
6
17.6.9 Variant D: Upper end position freely
adjustable, fixed lower limit stop
6
18
Troubleshooting
6
19
Repair
7
20
Repair
7
21
Manufacturer's address
7
22
Disassembly and disposal
7
23
Conformity Declaration
7
24
Technical data and dimensions
7
24.1 RevoLine M
8
24.2 RevoLine S
9
24.3 RevoLine M RH
10
24.4 RevoLine L
10
