elero DFE 100, Руководство по сборке, Страница: 5 / 16

3. Installation
Rolling door drives
CAUTION!
Observe the following safety instructions.
Failure to observe them can lead to bodily injuries!
• Rated torque, speed, voltage, operating time, stop torque, protection class and degree of protection must be adapted to the
requirements of the driven product.
• It must be ensured that an entrapment between the driven part and the surrounding fixed parts due to the movement of the
driven part is prevented.
• Before installing the drive, it is necessary to check whether the driven part is in good mechanical condition, its weight is
balanced and it can be opened and closed easily.
• Always use a suitable aid for a drive that weighs more than 20 kg.
A hole is available for this in the gearbox casing.
• The drive must be installed at a height of at least 2.50 m above the floor or any other access height.
• If the drive is controlled by an pushbutton (jogging mode/dead-man‘s safety system), then this actuator must be installed at a
height above 1.5 m and be separated from moving parts.
• The operating range of the system must always be visible during operation.
• After installation, check that the security system and manual mode are working properly.
3.1 Safety instructions for installation
© elero GmbH EN | 5