Explanation of functions
EN-16
INTERMEDIATE POSITION
The intermediate position is a position of the roller shutter/blind
between the upper and lower limits that can be freely selected.
This position can also be reached from the upper position after
programming.
Press the DOWN button twice in rapid succession to move to the
intermediate position.
When the system is in venetian blind mode, it is also possible to
programme a reverse position. In this case, this command will be
automatically executed following the intermediate position command.
VENTILATION/REVERSE
The ventilation/reverse position is a position of the roller shutter/
blind between the upper and lower limits that can be freely selected.
Using this function, you can raise the shutter from the lower end
limit until the ventilation slits are open. The slats of the blind will be
turned.
Press the UP button twice in rapid succession to move to the ventila-
tion/reverse position.
PROG 1/PROG 2
PROG 1 END LIMIT / PROG 2 END LIMIT
With the setting PROG 1 END LIMIT/PROG 2, the drive moves into
the lower limit position according to an automatic control command
▼
executed via the menu level PROG 1/PROG 2 END LIMIT.
INTERMEDIATE POSITION
With the setting PROG 1/PROG 2 INTERMEDIATE POSITION, the
drive moves into the pre-set intermediate position according to an
automatic control command
▼
.
VENTILATION/REVERSE
With the setting PROG 1/PROG 2 VENTILATION/REVERSE
POSITION, the drive first moves into the lower limit position and
then into the ventilation/reverse position according to an automatic
control command
▼
.
AstroTec-868_AstroTec-868_bidi EN_0412.indd 16
stroTec-868_AstroTec-868_bidi EN_0412.indd 16
12.04.2012 17:31:14
12.04.2012 17:31:14
