Elenberg DVDP-2417, Инструкция по эксплуатации

Страница: 51 / 59

51
• If an amplifier allows 2 CH signal input “LT/RT” mode could be
chosen that means to pass the 2 CH signal through to amplifier for
late processing.
Select Front Speaker
To choose “Large/Small” for the front speaker.
Select Center Speaker
With “Domnmix” off can choose “Large/Small or off” items for the
“Center speaker”
Select Rear Speaker
With “Downmix” off can choose “Large/Small or off” items for the
“Rear Speaker”.
• “Large” means complete frequency audio speaker“ Small” means
high frequency speaker. Use actual speakers configuring to ad-
just supper low frequency. If small speaker is connected, don’t
choose “Large” setting, otherwise a high volume will damage the
speaker.
• “Center speaker”, “Rear speaker ” setting must be done under the
condition of “Downmix” being with 5.1CH”. change 5.1 to OFF
Select Subwoofer
To choose “On/off” for the subwoofer means: “On “, the woofer is
used.
Select Test Tone
With 5.1 operating choose “On”, will check 5 CHs in turn.
• The checking must be done with no disc in the unit and under the
condition of “Downmix” being with 5.1CH”, change 5.1 to OFF.
Using this function can check all CHs if their linkage with sound
box is correct or wrong.
Select Dialog
With “Audio output mode”, and choose “LT/RT stereo” then under
the “Speaker Setup Page ” you can select “Dialog ” item and adjust
volumes.
• While playing 5.1CH disc, can adjust speakers volumes via “dia-
log”.
Select Post DRC
Dynamic compress output can low-
er volumes processing sound ef-
fect under the conditions of within
speakers max output. The item is
divided into “On off auto”.
SPDIF Setup Page
Move ▲/▼ direction buttons in the
audio setting menu page to choose