Elektron Digitone Скачать руководство пользователя страница 64

Страница: 64 / 86

14. GLOBAL SETTINGS MENU

The column to the left selects what will be received. Select the column using the

[LEFT]

arrow key. Use

the

[UP]

[DOWN]

keys or the

TRACK LEVEL

knob to navigate in the column. The SysEx data receive

alternatives located in the column to the right will change depending on the selection made in the left

column. Press the

[RIGHT]

arrow key to access this column. Use the

[UP]

[DOWN]

keys or the

TRACK

LEVEL

knob to select what will be received. Press

[YES]

to initiate the SysEx receive procedure. The

Digitone starts listening to incoming data. Press

[NO]

to stop listening.

ANYTHING

will listen to and receive any viable SysEx data sent (patterns, settings, Sounds).

PATTERN

will store a received pattern to the selected pattern slot.

SOUNDS

will store a received Sound to the selected slot of the +Drive Sound library. The option

ANYWHERE will place the Sound in the first free slot available. To the right of the bank indication, the

amount of free slots can be seen.

•

Initiate the SysEx send from the sending device after the Digitone has started listening

to incoming data.

•

When receiving to a specific list position, any subsequent data will be received on the

next position, or positions, in the list.

•

The Digitone can receive SysEx data at any time, regardless of the currently active

menu. The data will be loaded into the position specified when it was saved, or the first

free slot if unspecified.

14.5 SYSTEM

The System menu contains OS UPGRADE and DRIVE options for the Digitone.

14.5.1 OS UPGRADE

Use this menu option when you want to upgrade the Digitone OS. Use our free Elektron Transfer soft-

ware to send the OS syx file. You can download the Elektron Transfer software and the OS syx file from

the Elektron website.
You must connect the device you use to send the OS syx file to either the MIDI IN or USB port of Digi-

tone for the transfer to be possible.
Please note that the Digitone does not appear as an icon on your computer desktop.

1. Press

[YES]

to make Digitone start listening for incoming OS SysEx data. If you wish to cancel the

waiting state, press

[NO]

2. Open Elektron Transfer and select Elektron Digitone for MIDI Input device as well as MIDI Output

device.

3. Drag and drop the syx file to the Elektron Transfer main window to send it to the Digitone.

A progress bar is visible on the Digitone screen when receiving the OS. When the process is completed,

the OS is updated, and the unit reboots.

Содержание Digitone























































































Результаты поиска

Содержание Digitone

Отзывы:

Elektron Digitone, Руководство пользователя, Страница: 64 / 86

Результаты поиска

Содержание Digitone

Отзывы: