Elektron Digitone Скачать руководство пользователя страница 63

Страница: 63 / 86

14. GLOBAL SETTINGS MENU

14.4 SYSEX DUMP

In the SYSEX DUMP menu, projects, patterns, and Sounds can be sent and received. Select a menu option

using

[UP]

[DOWN]

or the

TRACK LEVEL

knob. Press

[YES]

to open the highlighted menu selection.

When receiving or sending SysEx data, the MIDI ports or the USB port of the Digitone should be connected

to the external sending/receiving device.
If the Digitone is sending or receiving SysEx data through the MIDI ports, use the Elektron TM-1 USB MIDI

interface for up to 10x transfer speeds.
If the external device is a computer, we recommend using our free SysEx utility C6, which can be down-

loaded from the Elektron website.

14.4.1 SYSEX SEND

Here projects, patterns, and Sounds can be sent to an external device via the MIDI OUT port or the USB

port of the Digitone.

The column to the left selects what will be backed up. Select the column using the

[LEFT]

arrow key.

Use the

[UP]

[DOWN]

keys or the

TRACK LEVEL

knob to navigate in the column. The SysEx data send

alternatives located in the column to the right will change depending on the selection made in the left

column. Press the

[RIGHT]

arrow key to access this column. Use the

[UP]

[DOWN]

keys or the

TRACK

LEVEL

knob to select what will be sent. Press

[YES]

to initiate the SysEx send procedure.

PROJECT

will send the active project (settings, patterns, Sounds in the Sound Pool) to the receiving

device.

PATTERN

will send the selected pattern to the receiving device.

SOUNDS

will send the selected Sound bank to the receiving device.

•

Backing up your data regularly is important!

•

Before initiating a SysEx send, first, make sure the receiving device is listening for data

to be sent.

14.4.2 SYSEX RECEIVE

Here projects, patterns, and Sounds can be received from an external device via the MIDI IN port or the

USB port of the Digitone.

Содержание Digitone























































































Результаты поиска

Содержание Digitone

Отзывы:

Elektron Digitone, Руководство пользователя, Страница: 63 / 86

Результаты поиска

Содержание Digitone

Отзывы: