Elektron Digitone Скачать руководство пользователя страница 60

Страница: 60 / 86

14. GLOBAL SETTINGS MENU

COPY TO...

Copies the selected Sounds to one of the following:

SOUND POOL copies the selected Sounds to the first free slots of the Sound pool.
+DRIVE copies the selected Sounds to the first free slots of the +Drive Sound library.
+BANK (A–H) copies the selected Sounds to the first free slots of a specific bank inside the +Drive.

EXPORT TO HERE

exports the active track Sound and saves it to the selected slot.

RENAME

Opens a screen where you can rename the selected Sound.

EDIT TAGS

opens a menu where Sounds can be tagged. Sounds can have any number of tags, but

only the first two shows on the sound list. Press

[YES]

to apply or remove tags. Highlight <SAVE> and

press

[YES]

to save

DELETE

deletes the Sound.

SELECT ALL

selects all Sounds in the list.

DESELECT ALL

deselects all Sounds in the list.

TOGGLE

enables or disables write protection for the selected Sounds. When a Sound is write-pro-

tected, it cannot be overwritten, renamed, tagged or deleted. A write-protected Sound has a padlock

symbol next to its name

SEND SYSEX

sends the selected Sounds as SysEx data.

•

Sounds in the +Drive Sound library are organized into eight banks, ranging from A to

H. Each bank can contain 256 Sounds. Press [BANK] + [TRIG 9–16] keys to view the

Sounds in a specific bank.

•

Press the [TRIG]

keys to preview the currently selected Sound.

Please note that the active tracks current effects settings affect the previewed Sound

•

Several Sounds can be simultaneously affected by the commands available in the

SOUND OPERATIONS menu. Select/deselect individual Sounds by highlighting them

and pressing [YES].

•

Press [FUNC] + [UP]/[DOWN] for faster scrolling in the sound list.

14.2.3 CLEAR TRACK SOUND

Sets the PARAMETER page parameters of the active track to their default values. When selecting this

option, a prompt will appear. Press

[YES]

to initialize the parameters or

[NO]

to cancel the operation.

Note that no parameter information will be permanently lost until the Sound is saved to the same slot it

was loaded from.

14.2.4 RENAME TRACK SOUND

Opens the NAMING menu where you can rename the Sound of the active track.

14.2.5 SETUP

Opens the SOUND SETUP menu. For more information, please see “9.4 SOUND SETUP MENU” on page

24.

14.3 MIDI CONFIG

In this menu you find various sub-menus dealing with the MIDI functionality.

14.3.1 SYNC

Controls how Digitone receives and sends MIDI clock and transport commands. Change settings by

using the

[LEFT]

[RIGHT]

arrow keys or the

[YES]

key.

Содержание Digitone























































































Результаты поиска

Содержание Digitone

Отзывы:

Elektron Digitone, Руководство пользователя, Страница: 60 / 86

Результаты поиска

Содержание Digitone

Отзывы: