Elektron Digitone Скачать руководство пользователя страница 43

Страница: 43 / 86

11. SYNTH TRACK PARAMETERS

Trig

Reset on

Reset off

Trig

Reset off

(

ARST

BRST

OFF)

Trig

Reset on

Reset off

Trig

11.5.4 PHRT

Phase reset sets if the operators phase are reset to start at 0 or not when they are trigged.

OFF do not reset any operators
ALL resets all operators
C resets operator C
A+B resets operator A, B1, and B2
A+B2 resets operator A and B2

11.5.5 BDEL

Same as

ADEL

but for operator group B (B1 and B2).

11.5.6 BTRG

Same as

ATRG

but for operator group B (B1 and B2).

11.5.7 BRST

Same as

ARST

but for operator group B (B1 and B2).

11.6 FLTR PAGE 1

On FILTER page 1, you find all parameters that control the Multimode filter and its associated envelope.
Press

[FLTR]

once to access this parameter page.

11.6.1 ATK

Attack Time sets the length of the attack phase of the filter envelope. (0–127)

11.6.2 DEC

Decay Time sets the length of the decay phase of the filter envelope. (0–127)

Содержание Digitone























































































Результаты поиска

Содержание Digitone

Отзывы:

Elektron Digitone, Руководство пользователя, Страница: 43 / 86

Результаты поиска

Содержание Digitone

Отзывы: