Elektron Digitakt, Руководство пользователя

Страница: 61 / 84

15. SETTINGS MENU
61
15.2 SAMPLES
Here you can manage your samples. Initially, here are three directories FACTORY, INCOMING, and
RECORDED. A wide array of preset samples are available in the write protected FACTORY directory.
The INCOMING directory is the default destination for samples sent to the DiDrive storage via the
C6 software. RECORDED will contain the samples you create when you sample with the Digitakt.
Use the [ARROW] keys to highlight a directory, and then press [YES] to open it. To exit a directory and
back one step up in the directory hierarchy, select the item labeled “..” at the very top of the screen and
press [YES] . Do this repeatedly to return to the top of the directory hierarchy. You can also press [FUNC] +
[RIGHT] to open a directory and [FUNC] + [LEFT] to exit a directory and back one step up in the hierarchy.
To distinguish directories from samples, all directories, including the directory exit row, “..”, are labeled with
a (D) at the very end of the row. When browsing a directory in the +Drive, a sample assigned to one of the
127 sample slots of the active project will have its slot number shown as seen below.
15.2.1 LOADING A SAMPLE
You can load one or several samples to the RAM memory of the active project.
1. Press [GLOBAL SETTINGS] , and then open the SAMPLES menu.
2. Open the FACTORY directory, and then navigate to the samples you want to load.
3. Highlight the samples, and then press
[YES] to select them. Any sample can be previewed, played
back by the voice of the active track (make sure to select an audio track). Highlight the sample and
then press [FUNC] + [YES] . Approximately, ten seconds of the sample can be previewed.
4. Press the [RIGHT] arrow key. A menu will appear on the right side of the screen.
5. Select LOAD TO PROJ and press [YES] .
The samples you selected (ticked) will now appear in the first available empty slots out of the 127 sample
slots of the active project. To view the samples currently in the RAM memory of the active project, press
the
[LEFT]
arrow key twice. This will bring up the left side menu.