Elektron Cycles, Руководство пользователя, Страница: 30 / 56

9. THE SEQUENCER
30
Adding parameter locks in GRID RECORDING mode:
1. Press [RECORD] to enter GRID RECORDING mode.
2. Press [TRIG] or [FUNC] + [TRIG] key to add a note trig or a lock trig and to where you want to
perform a parameter lock.
3. Press and hold the [TRIG] key of a previously placed trig (note trig or a lock trig) and then use the
PARAMETER knobs to adjust the parameters you want to lock.
The graphics become inverted for the locked parameter, and the locked parameter values are dis-
played. The [TRIG] key starts to quickly flash red to indicate that the trig now contains a parameter
lock. Also, the LED next to the PARAMETER knobs lights up red to indicate the parameter now has
a parameter lock assigned to it on that trig
4. Press and hold the [TRIG] key of a trig and then press [PUNCH] or [GATE] to parameter lock
these functions on a trig.
5. Press and hold the [TRIG] key of a trig and then turn LEVEL/DATA to open the TRIG NOTE menu.
Use LEVEL/DATA to change the
NOTE
,
VEL
, and
LEN
settings.
Removing a specific parameter lock on a trig in GRID RECORDING mode:
1. Press and hold the [TRIG] key that contains a parameter lock.
2. Turn the PARAMETER knob corresponding to the parameter from which you want to remove the
parameter lock.
3. Press [PLAY] to clear the parameter lock.
4. Press and hold the [TRIG] key that contains a PUNCH or GATE parameter lock, and then press
[PUNCH] or [GATE] to remove these parameter locks.
5. Press and hold the [TRIG] key that contains a NOTE , VEL , or LEN parameter lock, to open the
TRIG NOTE menu. Press [PLAY] to clear the parameter lock for these parameters.
Removing all parameter locks on a trig in GRID RECORDING mode:
1. Remove the note trig and then enter it again.
Adding parameter locks in LIVE RECORDING mode:
1. Press and hold [RECORD] , then press [PLAY] to enter LIVE RECORDING mode.
2. Turn a PARAMETER knob or play the [TRIG] keys, to input parameter locks to the active track.
Note trigs are locked accordingly, and lock trigs that contains the locks are placed on the sequenc-
er steps.
Removing a specific parameter lock on a trig in LIVE RECORDING mode:
1. Press and hold [NO] , and then turn the knob related to the parameter you want to remove.
Up to 80 different parameters can be locked in a pattern. A parameter counts as one (1)
locked parameter no matter how many trigs that lock it. If for example the cutoff parame-
ter of the filter is locked on every sequencer step, there are still 79 other parameters that
can be locked.
9.12.2 PRESET LOCKS
Preset locks are a specific type of parameter locks that lets you assign a specific preset to any step of
the sequencer. This powerful feature makes it possible to use several presets on the same sequencer
track. On Model:Cycles you can preset lock up to 64 different presets in each pattern.
The locked presets are added to the LOCKS folder in the root of the PRESET menu. For more informa-
tion, please see “8.5 THE LOCKS FOLDER” on page 23.
Adding preset locks:
1. Press [RECORD] to enter GRID RECORDING mode.
2. Press and hold a [TRIG] key, and then press [MACHINES] to open the PRESET menu.