Elektron Analog Four Скачать руководство пользователя страница 19

Страница: 19 / 130

THE USER INTERFACE

QUICK SCROLLING

Scroll through menus using the

SOUND SELECTION

wheel. In many menus, quick scrolling is also available.

Press

[FUNCTION]

+ the

[UP]

[DOWN]

arrow keys to move the cursor one menu page at a time.

COPY, CLEAR AND PASTE

Copy, clear and paste commands are available in a lot of contexts. A copy operation is performed by pressing

[FUNCTION]

[REC]

. A paste operation is performed by pressing

[FUNCTION]

[STOP]

. A clear operation is

performed by pressing

[FUNCTION]

[PLAY]

. Paste and clear operations can be undone by repeating the but-

ton press combination. See the different sections in the manual for more information about where these com-
mands are available.

ONE-HANDED OPERATION

The functional layout of the Analog Keys ensures many complex operations can be done using only one hand,
leaving the other hand free to play the

KEYBOARD

or tweak sounds

With the

[FUNCTION]

key in the vicinity of

the

[TRACK]

keys, one-handed track muting is possible. As is one-handed transpose locking, copy, clear and

paste commands, pattern play mode change, and more.

THE NAMING MENU

The naming procedure is identical for the various naming menus that exist.

The

[LEFT]

and

[RIGHT]

arrow keys are used to navigate between the letters. Turning the

SOUND SELEC-

TION

wheel or pressing the

[UP]

[DOWN]

arrow keys select the letter.

[FUNCTION]

[NO/RELOAD]

will

erase letters.

POP-UP MENU NAMING

While in a NAMING menu it is possible to open a pop up-menu displaying all available letters, symbols and dig-
its. Entering characters in the pop up-menu is often a considerably faster naming method. When a NAMING
menu is open, press the

[FUNCTION]

key to access the pop up-menu.

While keeping

[FUNCTION]

pressed use the

[ARROW]

keys to navigate to the character you want to insert.

Once there, release

[FUNCTION]

to insert the character.

•

Copy, paste and clear commands are available in the naming menus.

Содержание Analog Four



































































































































Результаты поиска

Содержание Analog Four

Отзывы:

Бренды по названию

Популярные бренды

Elektron Analog Four, Полное руководство пользователя

Результаты поиска

Содержание Analog Four

Отзывы:

Бренды по названию

Популярные бренды