Elektron Analog Four MKII Скачать руководство пользователя страница 64

Страница: 64 / 108

12 GLOBAL SETTINGS MENU

The column to the left selects what will be received. Select the column using the

[LEFT]

arrow key. Use

the

[UP]

[DOWN]

keys or the

TRACK LEVEL

knob to navigate in the column. The SysEx data receive

alternatives located in the column to the right will change depending on the selection made in the left

column. Press the

[RIGHT]

arrow key to access this column. Use the

[UP]

[DOWN]

keys or the

TRACK

LEVEL

knob to select what will be received. Press

[YES]

to initiate the SysEx receive procedure. The

Analog Four MKII will start listening to incoming data. Press

[NO]

to stop listening.

ANYTHING

will listen to and receive any viable SysEx data sent.

KIT

ACTIVE KIT

will when receiving kit SysEx data replace currently active kit with the received kit.

KIT 01-128

will store a received kit to the selected kit slot. An asterisk at the end of the kit name

indicates the kit is not linked to any pattern.

SOUND POOL

will store a received Sound to the selected slot of the Sound Pool of the active project.

+DRIVE SOUND

will store a received Sound to the selected slot of the +Drive Sound library. The op-

tion ANYWHERE will place the Sound in the first free slot available. To the right of the bank indication,

the amount of free slots can be seen.

PATTERN

will store a received pattern to the selected pattern slot. To the right of the pattern slot, the

name of the kit linked to the pattern is visible. An asterisk indicates the pattern is not linked to a kit.

SONG

will store a received song to the selected song slot.

GLOBAL

will store a received global to the selected global slot.

Initiate the SysEx send from the sending device after the Analog Four MKII has started

listening to incoming data.
When receiving to a specific list position, any subsequent data will be received on the next

position, or positions, in the list.
The Analog Four MKII can receive SysEx data at any time, regardless of the currently ac-

tive menu. The data will be loaded into the position specified when it was saved, or the first

free slot if unspecified.

12.11 SYSTEM

Accesses the menus USB CONFIG, OS UPGRADE, DRIVE and CALIBRATION described below.

12.11.1 USB CONFIG

To use the Analog Four MKII as an Overbridge device, you must set it to Overbridge mode. Do so by se-

lecting the OVERBRIDGE MODE menu item and ticking the box by pressing

[YES]

. For more information,

please see “6.6 OVERBRIDGE” on page 19.

Should you, for some reason, wish to disable the Overbridge integration functionality, select the item

called USB-MIDI ONLY and press

[YES]

Содержание Analog Four MKII













































































































Результаты поиска

Содержание Analog Four MKII

Отзывы:

Elektron Analog Four MKII, Руководство пользователя, Страница: 64 / 108

Результаты поиска

Содержание Analog Four MKII

Отзывы: