Elektron Analog Four MKII, Руководство пользователя

Страница: 48 / 108

10. THE SEQUENCER
48
Select the track that will be affected by pressing the corresponding [TRACK] key. Select the accent
value by turning the TRACK LEVEL knob. The higher the value, the more accentuation will be added to
accent trigs.
While the ACCENT menu is open, the sequencer will display accent trigs. Place or remove accent trigs
by pressing the
[TRIG]
keys. If an accent trig is placed on the same sequencer step as a note trig, the
note trig will be accentuated.
A note trig can be quickly accented. Keep the note trig pressed and press [BANK F]. An
accent trig will automatically be placed on the same sequencer step as the note trig.
Press a note trig/lock trig to quickly see if an accent trig is placed on the same sequencer
step as the trig. If that is the case, the [BANK F] key will light up.
10.12.7 NOTE SLIDE
The NOTE SLIDE menu makes it possible for the pitch of two separate note trigs to slide between each
other. Open the menu by pressing [FUNC] + [BANK G] . When this menu is active, and [TRIG] keys are
pressed, note slide trigs will be placed on the sequencer.
If a note slide trig is placed on the same step as a note trig, the pitch of the previous note trig will slide.
For instance, if a track contains two note trigs and a note slide trig is placed on the same step as the
second note trig, the pitch of the first note trig will slide to the pitch of the second note trig. The speed
of the pitch slide is determined by the SLI parameter, found in the second page of the OSC2 menu. For
more information, please see “APPENDIX A: SYNTH TRACK PARAMETERS” on page 82.
Note slides can be added to note trigs. Keep the note trig pressed and press [BANK G].
A note slide trig will automatically be placed on the same sequencer step as the note trig.
Press a note trig lock to quickly see if a note slide trig is placed on the same sequencer
step as the trig. If that is the case, the [BANK G] key will light up.
10.12.8 PARAMETER SLIDE
The PARAMETER SLIDE menu makes it possible for the parameter values of two separate note trigs or
lock trigs of a track to slide between each other. Open the menu by pressing [FUNC] + [BANK H] . When
this menu is active, and [TRIG] keys are pressed, slide trigs will be placed on the sequencer.
For a parameter value to slide between two trigs, it needs to be locked on one of the trigs. A locked pa-
rameter value will slide to the unlocked value and vice versa. To make the parameter value slide, place a
slide trig on the same sequencer step as the trig whose parameters you want to slide. The speed of the
slide is relative to the current tempo, and the slide is completed when the next trig is reached. Several
parameter values can slide at the same time.
Parameter slides can be quickly added to note trigs or lock trigs. Keep the note trig or lock
trig pressed and press [BANK H]. A parameter slide trig will automatically be placed on the
same sequencer step as the note trig/lock trig.
Press a note trig/lock trig to quickly see if a parameter slide trig is placed on the same
sequencer step as the trig. If that is the case, the <BANK H> key will light up.