Elektron Analog Four MKII, Руководство пользователя

Страница: 47 / 108

10. THE SEQUENCER
47
1ST is true when 1ST is false. A trig with this trig condition is always active apart from the first time the
pattern plays (when looped).
X%
is a probability condition. There is an x% chance that the trig will be active.
A:B A sets how many times the pattern plays before the trig condition is true. B sets how many times
the pattern plays before the count is reset and starts over again. This cycle then repeats until you
press [STOP] .
For example:
With the setting 1:2, the trig condition is true the first time the pattern plays and then the third, the fifth,
and so on.
With the setting 2:2, the trig condition is true the second time the pattern plays and then the fourth,
the sixth, and so on.
With the setting 2:4, the trig condition is true the second time the pattern plays and then the sixth, the
tenth, and so on.
With the setting 4:7 the trig condition is true the fourth time the pattern plays and then the eleventh,
the eighteenth, and so on.
10.12.4 FILL MODE
FILL mode can be used to create a temporary variation, such as a drum fill, in your pattern.
Press
[FUNC] + [FILL] to cue FILL mode for one pattern cycle. It will become active when the pattern
loops, and remain active until it loops again. You can also activate FILL mode at any time, and for any
duration, by pressing and holding the [FILL] key when the pattern is playing (GRID RECORDING mode
cannot be active). The FILL mode is active for as long as the key is held.
10.12.5 TRIG MUTE
The TRIG MUTE menu makes it possible to add mute masks on a per trig basis. Each track can have its
separate trig mute trigs. Open the menu by pressing [FUNC] + [BANK E] .
Select the track to which you want to add trig mute trigs by pressing the corresponding [TRACK] key.
While in the TRIG MUTE menu, entered trigs will mute any trigs placed of the active track, given the trigs
are located on the same sequencer steps.
• Trig mutes can be quickly added to note trigs or lock trigs. Keep the note trig or lock
trig pressed and press [BANK E]. A trig mute trig will automatically be placed on the
same sequencer step as the note trig/lock trig.
• Press a note trig/lock trig to quickly see if a trig mute trig is placed on the same se-
quencer step as the trig. If that is the case, the [BANK E] key will light up.
• Trig mutes are good for experimenting with the feel of tracks when playing live. The
last eight steps of a bass line track could, for example, be muted to build suspense.
10.12.6 ACCENT
Adding accent trigs is useful for quickly changing the volume and filter envelope behavior, or accentua-
tion, for chosen steps of a track. Accent level is also a modulation destination, meaning it can be affected
by for example LFOs. Open the ACCENT menu by pressing [FUNC] + [BANK F] .