background image

9. KITS AND SOUNDS

33

•  +DRIVE
•  BANK A–P

9.8.3 STORE TRACK SOUND

Saves the active track Sound to the selected slot. 

[YES]

 + 

[SND]

 offers a short cut to this operation.

9.8.4 RENAME

Renames the selected Sound.

9.8.5 EDIT TAGS

Opens a menu where Sounds can be tagged. Sounds can have any number of tags, but only the two first 

will be shown in the Sound list. Apply or remove tags by pressing 

[YES]

.

9.8.6 DELETE

Deletes the Sound.

9.8.7 TOGGLE

Enables or disable write protection for the selected Sounds. When a Sound is write protected, it cannot 

be overwritten, renamed, tagged or deleted.

9.8.8 SEND SYSEX

Sends the selected Sounds as SysEx data.

9.8.9 SELECT ALL

Selects all Sounds in the list.

9.8.10 DESELECT ALL

Deselects all Sounds in the list.

Sounds residing in the +Drive Sound library are organized into 16 banks, ranging from A to 

P. Each bank can contain 256 Sounds. Use the [TRIG] keys to view only Sounds located in a 

specific bank.
You can preview the currently selected Sound using the mini keyboard or via the MIDI au-

to-channel. The Sound is played through the active track. Please note that if the previewed 

Sound is routed through the effects, the current effects settings will affect it.
Several Sounds can be simultaneously affected by the commands available in the SOUND 

OPERATIONS menu. Select/deselect individual Sounds by highlighting them and pressing 

[YES]. 
Press [FUNC] + [UP]/[DOWN] for faster scrolling in the Sound list.

9.9 CLEAR TRACK SOUND 

Sets the PARAMETER page parameters of the active track to their default values. When selecting this 

option, a prompt will appear. Press 

[YES] 

to initialize the parameters or 

[NO]

 to cancel the operation. Note 

that no parameter information will be permanently lost until the kit is saved to the same slot it was loaded 

from.

9.10 RENAME TRACK SOUND

Opens the NAMING menu where you can rename the Sound of the active track.

9.11 SOUND SETTINGS

Opens a menu where various Sound related settings are found. Use the 

[UP]

/

[DOWN]

 arrow keys or the 

TRACK LEVEL

 knob to scroll in the menu. Use the 

[LEFT]

/

[RIGHT]

 arrow keys to change the settings The 

parameters assignable to the controllers (modulation wheel, breath controller et cetera) will vary according 

to the type of track that is active: Synth, FX or CV.

Содержание Analog Four MKII













































































































Отзывы: