ELEKTRO PARTNER UniProbe, Руководство пользователя

Страница: 8 / 158

MSS USER MANUAL
Introduction
Dear Customer,
We would like to thank you for choosing a TEXA product for your workshop.
We are certain that you will get the greatest satisfaction from it and receive a
great deal of help in your work.
Please read through the instructions in this manual carefully and keep it for
future reference.
Reading and understanding the following manual will help you to avoid damage
or personal injury caused by improper use of the product to which it refers.
TEXA S.p.A reserves the right to make any changes deemed necessary to
improve the manual for any technical or marketing requirement; the company
may do so at any time without prior notice.
This product is intended for use by technicians specialized in the automotive
field only. Reading and understanding the information in this manual cannot
replace adequate specialized training in this field.
The sole purpose of the manual is to illustrate the operation of the product sold.
It is not intended to offer technical training of any kind and technicians will
therefore carry out any interventions under their own responsibility and will be
accountable for any damage or personal injury caused by negligence,
carelessness, or inexperience, regardless of the fact that a TEXA S.p.A. tool
has been used based on the information within this manual.
Any additions to this manual, useful in describing the new versions of the
program and new functions associated to it, may be sent to you through our
TEXA technical bulletin service.
This manual should be considered an integral part of the product to which it
refers. In the case it is resold the original buyer is therefore required to forward
the manual to the new owner.
Reproduction, whole or in part, of this manual in any form whatsoever without
written authorization from the producer is strictly forbidden.
The original manual was written in Italian, every other language is a translation
of the original manual.
© copyright and database rights 2011. The material contained in this
document is protected by copyright and database rights. All rights reserved
according to law and international agreements.
7
en