ELEKTRO PARTNER TwinProbe, Руководство пользователя

Страница: 39 / 50

10.5.2 PWM 5 V
PWM 5 V mode allows to simulate last generation sensors with 0-5 V PWM
or PFM type signals.
For example it is possible to change the frequency of air mass meter to
simulate the quantity of detected air.
This mode requires a ground cable to connect the negative pole of the
battery to the one of the tool to be tested (sensor).
1. Terminal for the connection to the device
2.
Clamp for connection to the battery
Proceed as follows:
1. Connect the clamp to the negative pole of the battery.
2. Connect the ground cable to the negative of the device (sensor).
38