Elektro-Automatik PSI 9000 DT Series, Руководство по эксплуатации

Страница: 46 / 76

Page 46
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
ea1974@elektroautomatik.de
PSI 9000 DT Series
3.4.3.8 Menu “HMI Setup”
These settings refer exclusively to the control panel (HMI).
Element Description
Language Selection of the display language between German, English, Russian or Chinese.
Backlight The choice here is whether the backlight remains permanently on or if it should be switched
off when no input via screen or rotary knob is made for 60 s. As soon as input is made, the
backlight returns automatically. Furthermore the brightness can be selected in 10 steps.
HMI Lock See “„3.7 Control panel (HMI) lock“ on page 59.
Limits Lock See
„3.8 Limits lock“ on page 60
Key Sound Activates or deactivates sounds when touching a touch area in the display. It can usefully
signal that the action has been accepted.
Alarm Sound Activates or deactivates the additional acoustic signal of an alarm or user defined event which
has been set to “Action = ALARM”. See also
„3.6 Alarms and monitoring“ on page 57.
Status page Enables/disables two display related options for the main screen with actual and set values:
Show meter bar
: in U/I/P mode, i. e. resistance mode not activated, a meter bar for 0-100%
actual values of voltage, current and power is shown (see example figure below)
Alternative status page : switches the main screen of the device with its actual and set
values of voltage, current, power and - if activated - resistance to a simpler display with only
voltage and current, plus status.
Default setting: both disabled