Elektro-Automatik PSI 9000 DT Series, Руководство по эксплуатации

Страница: 25 / 76

Page 25
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
ea1974@elektroautomatik.de
PSI 9000 DT Series
1.8.5 Control elements
Figure 6- Control Panel
Overview of the elements on the control panel
For a detailed description see section
„1.9.5. The control panel (HMI)“.
(1)
Touchscreen display
Used for selection of set values, menus, status and display of actual values and status.
The touchscreen can be operated with the fingers or with a stylus.
(2)
Rotary knob with push button function
Left knob (turn): adjusting the voltage set value, or setting the parameter values in the menu.
Left knob (push): selection of the decimal position to be changed (cursor) for the assigned value.
Right knob (turn): adjusting the current, power or resistance set value, or setting parameter values in the menu.
Right knob (push): selection of the decimal position to be changed (cursor) for the assigned value.
(3)
On/Off Button for DC output
Used to toggle the DC output between on and off, also used to start a function run. The LEDs “On” and “Off”
indicate the state of the DC output, no matter if the device is manually controlled or remotely
(4)
USB-A port
For the connection of standard USB sticks. See section
„1.9.5.5. USB port (front side)“
for more details.