Elektro-Automatik EA-PSI 10000 3U Series Скачать руководство пользователя страница 53

Страница: 53 / 96

06230820_manual_psi_10000_3u_15kw_en_01

3.4.7

Switching the DC output on or off

The DC output of the device can be manually or remotely switched on and off.

Switching the DC output on during manual operation or digital remote control can be disabled by pin REM-

SB of the built-in analog interface. For more information refer to 3.4.3.1 and example a) in 3.5.4.7.

►

How to manually switch the DC output on or off

As long as the control panel is not completely locked press the button

On/Off

. Otherwise you are asked to disable the

HMI lock. In case the HMI lock is connected to a PIN, you are asked to enter the PIN first.

With the possible HMI lock removed, button

On/Off

toggles the DC output state, as long as this is not restricted by an

alarm or the device being in remote control.

►

How to remotely switch the DC output on or off via the analog interface

See section ““3.5.4. Remote control via the analog interface“.

►

How to remotely switch the DC output on or off via the digital interface

See the external documentation “Programming Guide ModBus & SCPI” if you are using custom software, or refer to the

external documentation from LabView VIs or other software provided by the manufacturer.

3.4.8

Recording to USB stick (logging)

Device data can be recorded to USB stick (USB 3.0 is supported, but not all memory sizes) anytime. For specifications of the

USB stick and the generated log files refer to section

“1.9.6.5. USB port (front side)“.

The logging stores files of CSV format on the stick where the layout of the log data is the same as when logging via PC with

software EA Power Control. The advantage of USB logging over PC logging is the mobility and that no PC is required. The

logging feature just has to be activated and configured in the Settings.

3.4.8.1

Restrictions

USB logging in this form isn’t available or automatically deactivated when the PV function

EN50530

is configured and loaded.

3.4.8.2

Configuration

Also see section

3.4.3.6. After USB logging has been enabled and the parameters

Logging interval

and

Start/Stop

have

been set, logging can be started anytime from within the Settings menu or when switching the DC output on, all depending

on the selected start/stop mode.
Furthermore see section

3.4.3.1

. There are additional settings for the CSV file itself as generated by the USB logging features.

You can switch the column separator format between german/european standard (

Default

) or US american standard (

The other option is used to deactivate the physical unit that is added by default to every set/actual value in the log file. Deac

tivating this option simplifies the CSV file processing in MS Excel or similar tools.

3.4.8.3

Handling (start/stop)

With setting

Start/stop

At DC on/off

logging will start each

time the DC output of the device is switched on, no matter if

manually with the front button

On/Off

or remotely via analog

or digital interface. With setting

Manual

it’s different. Logging

is then started and stopped only in the quick menu (see figure

to the right).

Button

starts logging manually and changed to

, which is for manual stop.

Soon after logging has been started, the symbol

indicates the ongoing logging action. In case there is an error while logging,

such as the USB stick is full or removed, it will be indicated by another symbol (

). After every manual stop or switching the

DC output off the logging is stopped and the log file closed.

Содержание EA-PSI 10000 3U Series

































































































Результаты поиска

Содержание EA-PSI 10000 3U Series

Отзывы:

Похожие инструкции для EA-PSI 10000 3U Series

Бренды по названию

Популярные бренды

Elektro-Automatik EA-PSI 10000 3U Series, Руководство пользователя

Результаты поиска

Содержание EA-PSI 10000 3U Series

Отзывы:

Похожие инструкции для EA-PSI 10000 3U Series

Бренды по названию

Популярные бренды