ELEKTRA SelfTec 16, Руководство по установке, Страница: 11 / 67

Installation on the pipe
• The relevant ELEKTRA SelfTec 16 heating cable
should be selected depending on spiralling
ratio (the cable should be longer and the
surplus is for the cold tail connection).
• Mount the heating cable alongside the pipeline
in its bottom part with self-adhesive instal-
lation tape fixed with the spacing of 30 cm.
If, the selected cable is longer than the heated
pipe, the cable should be installed spirally.
• For plastic pipelines, fix additionally self-adhe-
sive aluminum foil along the heating cable
to improve the temperature distribution on
®
• gutter and downpipe holders (available
as an accessory),
• support bar (available as an accessory).
11