background image

 

 

Adjusting the grind texture 

1.  Hold down the locking pin and 

turn the grinding adjustment 
wheel one notch at a time: 

ƒ

 

clockwise

 to make the coffee 

grounds finer 

ƒ

 

anti-clockwise

 to make the 

coffee grounds coarser 

2.  Release the adjustment wheel locking pin which will click and lock 

back into its new position.  

 
The grinding adjustment wheel will move freely while the locking pin is 
held down. It’s important to move the grinding adjustment wheel 

only 

one notch at a time

, then to release the locking pin. A small change 

in the grind texture can make a big change to the flow of coffee.  
 
Test the grind after each adjustment by making an espresso coffee. 
Before making a change to the grind texture, be sure to empty all 
previously ground coffee from the dosing chamber. See page 9 for 
details of the grind adjusting wheel and operation of the grinder. 
 

Testing the coffee dose  

Coffee dose

 refers to how much coffee comes out of the grinder with 

each pull of the dosing lever. The size of the dose depends on the 
type of espresso machine (see next page).  
 
The dose is determined by first dispensing the required number of 
doses into a single cup filter basket. After tamping, the level of 
grounds in the basket should be around 4–5mm from the rim of the 
filter basket. (This also applies to the double cup filter basket.) If the 
basket is too full, it will be difficult to fit the coffee handle to the 
espresso machine. If the level is too low, the coffee will lack taste and 
could flow too quickly. Once set for a particular espresso machine, the 
dose will not usually need to be readjusted. 

 
 
 
 
 
 
 
 
 
 
 
 

Operating the dosing lever. 

Place thumb on the front of the 
dispensing unit (to steady the 
grinder) and pull the dosing lever 
fully forwards to its end, release it 
and allow it to spring back to its 
resting position. 

It’s important when adjusting the dosing quantity to 

roll the coffee.

 

This is done by placing the dispenser lid under the dosing unit outlet 
and operating the dosing lever so coffee grounds fall onto the lid. Do 
this about five times then return the ground coffee on the lid back into 
the dispensing unit. Repeat this process once more to ensure all six 
dosing chambers have been evenly filled. 

Training manual – Grinder

 

 

Содержание Microcasa












Отзывы: