Elekta Neuromag NM21283A, Руководство пользователя

Страница: 75 / 85

Parameters B
NM21283A-A 69
A P P E N D I X B
Parameters
This appendix lists all parameters that can occur in a tuner parameter
(.tnp) file. The parameters are arranged by their parameter set. Each set
contain parameters that are (or would be) displayed in same dialog box.
The class of a parameter is a tag that is used to group functionally similar
parameters together. Parameters can for example be loaded per class
basis, and e.g. class preferences is saved to a special file. Parameter name
is the name used in the setup files. If the type name contains brackets []
after the name, this means that the parameter is a vector (typically one
value for each channel). If the type contain braces {} the type is a set of
the base type objects
The system parameters contain parameters that describe the structure of
the measurement system and its environment. The parameters are shown
in Table B.2.
class parameter name type description
system SysType string Type of the device
system LineFrequency float Power line frequency of the site [Hz]
system OVLlevel float Overload voltage level [V]
system UseHeNames integer Use helium level in state file names?
system HeLevels integer{} List of helium levels used [%]
system HeLevelLog string Name of the helium level log file
system HeatingTime float How long to heat a sensor [s]
system JanitorService string Janitor service name
system JanitorBoot string janitor boot file name
system CurrentPar string Directory for current parameter settings
system HistoryDir string Directory for history files
system ReferenceIV string Reference I-V
system NoiseLog string Noise log file name
system AuxCollVar string Auxiliary collector variable to be sent
system ReferenceCh integer X-signal name
Table B.1 System Parameters