Elekta Neuromag NM21283A, Руководство пользователя

Страница: 74 / 85

A Command line options
68 NM21283A-A
A P P E N D I X A
Command line options
This appendix describes the command line arguments and options of the
tuning program.
Command syntax:
tune_vv
<options>
Command line options:
-nolock
Ignore lock files.
-expert <number>
Set the expert level of the user.
-default <measurement>
Set the default measurement mode. The valid values for the mea-
surements with this option are: tune, fine-tune, noise, i-phi, manual-
tune, fft, gate, bias, offs, modu, signal.
-defs <filename>
Define the name of the file containing the system parameters
(default values).
-static <filename>
Define the name of the file containing the “static” parameters.
-load <filename>
Define the name of the state file to load in start-up.
-site <filename>
Define the name string describing the measurement site.
-device <filename>
Define the name string describing the device.
The valid values for the measurements with the
-default
option are:
tune, fine-tune, noise, i-phi, manual-tune, fft,
gate, bias, offs, modu, signal
.