Elekta Neuromag NM21283A, Руководство пользователя

Страница: 67 / 85

NM21283A-A 61
12
C H A P T E R 1 2
Description of the menus
This chapter gives reference information about all menu buttons. It con-
tains only a very brief description of the actions and possibly a reference
to a more detailed description. This section applies when the expert level
is set to 1.
12.1 File Menu
The file menu contains commands that are related to saving and loading of
the internal state of the program and the measurement device.
Load tunings
This button enables you to load magnetometer state from a file. The
file must be in the tuner format (.tnp). Using this command, only the
state parameters are loaded, all the rest of the information in the file
is discarded. If you need to load some other information, use
Load
> Load selected params button. See “About saving and loading
settings” on page 14.
Save tunings
This button saves all currently active parameters into a file. It also
sets the “current” operating point information within the program to
values being used at the saving time. See “About saving and loading
settings” on page 14.
Revert to previous o.p.
This button returns the magnetometer tuning state to the “current”
tuning state. This state reflects the state of the magnetometer at the
time when the program was started, or the state specified in the
parameter file last loaded or saved. See “Reverting operating points”
on page 57.
Revert to start-up state
This button returns the magnetometer tuning state to the state that
was prevailing when the tuner program was started. It undoes all
changes made by the tuning program. See “Reverting operating
points” on page 57.