EE112W series User Manual
Applications
Introduction and Intellectual property Rights Statement
The Package
● What’s Inside the Package ● Installation ● Functions ● User Tips
● Specifications ● Optional Accessories ● Important Safety Information ● Limited Warranty Information
Rev. EE112W series 10102017 Page 1
Outdoor/Indoor Weatherproof, AC powered LED Light, with “All in One” Operating Capability:
Standard
- Can be used as a switch-controlled or AC power always ON lighting to new lighting project or like DIY to replace
existing outdated light features. It serves as an standard application that provide continuous illumination in any conditions.
Doppler Sensing (EE812WMC capable)
– Provides outstanding motion sensing performance and Unlike PIR motion detection,
this product can effectively sense the temperature changes in its surroundings, and without being blocked by obstacles.
Smart Sensor Profiles (EE812WMC capable)
– Users are offered with two selectable energy-saving lighting modes. In “Auto
Off” mode, the light will be turned off automatically if the motion sensor doesn’t detect any movement across its coverage area.
In “Gradually Dimming Lighting” mode, the light will dimmed down to preset light level (fixed 10% of Max brightness) when no
motion has been detected.
Dusk to Dawn Illumination
– The lighting feature also offers standard, automatic Dusk to Dawn lighting profile if the light is
connected with AC power ON all the time. In such case, any manual settings and extra photo cell sensor can be waived. During
nighttime, it will automatically turn on and keep dusk to dawn operation for the whole night. A built-in photo sensor allows users
to set up the lighting mode based on their preference. Users can set up the lights only turn on at evening or keep working during
partial daylight condition.
The Reference of Wiring Diagram for Standard AC Lighting for Switch ON-OFF Control: (Fig. 1) and Fixed AC Power Source
Lighting for Commercial, Industrial or Public Facilities: (Fig. 2)
Please Read Carefully Before Installing the Unit!
®
Installation
Mount & Setup
(
)
Remove the fixture cover and the LED board before installation.
Mount the light fixture base on existing electric standard J-Box
and connect power wires (white: N & Black: H),
refer:
Fig. 1, 3-6
. For concrete/brick/stucco surface without the J-Box: drill
clearance holes by using a 3/16" masonry bit, insert plastic anchors and screw the base into position.
Power ON as general lighting control for normal lighting
function.
Apply as Standard Light
Connect with AC power source (100-240V/AC ) as standard single or group lighting system. The light (s) can be manually turned
and
via a standard wall mounted switch as general lighting, and plus its motion activated or saving pre-set dimming
function profiles if no any movement around coverage areas (
refer:
).
6-½”
Thank you for choosing the EE112WMC (built with RF-sensor) and EE112W (without RF-sensor) LED SMART light series. With its effortless
setup and lightweight design, the EE112WMC and EE112W LED Smart Lights conforms to all your lighting needs. With lightweight design,
our product is easy to setup and can be use to meet diverse lighting requirements It was designed and made to provide long-term trouble
free service with environment friendly LED-illumination and Doppler Sensing technology. Covered under multiple US, European, China and
other international patents granted and pending worldwide. All rights reserved. Contents:
Wall Switch
White
Black/Red
120VAC
L/H
N
Individual New or Replacement Application
Multiple New or Replacement Application
120VAC
CB
Black/Red
White
N
L/H
Fig.6
Fig.5
Fig.4
0
1
Fig.7 Dip switchs setting reference
AC power
connecting
cables
1 - LED Sensing Light Unit 4 – Hardware Package with Screws and Anchors to mount the light body 1 -
